clamps

Posted 12/18/2003 6:45 PM (#1792)
Subject: clamps


anybody have any ideas on how i can make or buy clamps to connect sidecar to frame on a hardtail. they are way out of my pricerange im on a foodstamp budget. any auto parts work as connector , clamp, and any other hardware. help i got to get the bike stable before i loose it in the snow. robertsolberg2000@yahoo.com robertsolberg2000 yahoo mess.
Top of the page Bottom of the page
Hack'n
Posted 12/18/2003 7:10 PM (#1793 - in reply to #1792)
Subject: RE: clamps



Expert

Posts: 4833
2000200050010010010025
Location: Boise, Idaho
I've got lots of Velorex U-clamp assemblies (Eye bolt type) that fit most round tube frames. $49.09 each plus shipping.
Top of the page Bottom of the page

Posted 12/19/2003 7:38 PM (#1799 - in reply to #1792)
Subject: RE: clamps


Bob,Go to the Motorvation site, www.motorvation.com and look at their mounts. They have a choice (on the left side) that says something like, "A close up look at our mounts". Then, on the resulting page, they have a link near the top that takes you to drawings that are good enough for you to use in making your own mounts if you are really handy. I hope this helps. Al Olme
Top of the page Bottom of the page

Posted 12/19/2003 7:44 PM (#1800 - in reply to #1799)
Subject: RE: clamps


thanx im on my way to that site
Top of the page Bottom of the page