Return to Home page

Search | Statistics | User Listing Forums | Calendars | Albums | Quotes Forum ->  General discussion -> Technical Discussion -> View Thread

You are logged in as a guest. ( logon | register )

Random quote: It feels like the pony wants to run - you can feel it in the reins

Easy Rider Sidecar
Jump to page : 1
Now viewing page 1 [25 messages per page]
View previous thread :: View next thread
   General discussion -> Technical DiscussionMessage format
Posted 12/15/2015 11:38 PM (#87139)
Subject: Easy Rider Sidecar

New User

Posts: 1
I have acquired an Easy Rider basket case that seems to have been built some time in the 1970s. It has a 17 mm axle and seems to require a 17 inch wheel. The wheel hub can be no wider than 2 3/8 inches in order to have enough axle threads left to screw down the castle nut and still be able to put in a cotter pin. The wheel that was on the frame when I bought it is a 19 inch and the hub is too wide for the axle so changing out the rim is not an option. Do any of you know of an available original wheel, or a suitable replacement?


Fayetteville, Arkansas
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [25 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread


Copyright 2004-2008, The United Sidecar Association — Built by BarringtonPress — Send your suggestions and comments to the webmaster
USCA Web usage policy

(Delete all cookies set by this site)
Running MegaBBS ASP Forum Software
© 2002-2018 PD9 Software