Return to Home page

Search | Statistics | User Listing Forums | Calendars | Albums | Quotes Forum ->  General discussion -> Technical Discussion -> View Thread

You are logged in as a guest. ( logon | register )

Random quote: Remember riding isn't inherently dangerous... Crashing is! - Chopper Mick
- (Added by: Administrator)

Steering dampner
Jump to page : 1
Now viewing page 1 [25 messages per page]
View previous thread :: View next thread
   General discussion -> Technical DiscussionMessage format
Posted 3/3/2016 9:34 PM (#88108)
Subject: Steering dampner


Posts: 9
Does anyone make a good dampner? I am getting a violent wobble at 20 mph. Bmw /2 frame with a /5 fork
Top of the page Bottom of the page
Posted 3/4/2016 1:33 PM (#88114 - in reply to #88108)
Subject: RE: Steering dampner

Extreme Veteran

Posts: 423
Do you have violent wobble at 20 mph when you have both hands on the handlebars?
Top of the page Bottom of the page
Posted 3/4/2016 1:42 PM (#88115 - in reply to #88108)
Subject: RE: Steering dampner


Posts: 4833
Location: Boise, Idaho
There are many dampers available. Most use the VW type damper. Harley uses this type ($125.)
I have one left in stock for $75. including shipping.

Northwest Sidecars
Top of the page Bottom of the page
Posted 3/4/2016 2:11 PM (#88118 - in reply to #88108)
Subject: Re: Steering dampner


Posts: 1560
Usually if you have a violent shake you have some underlying issues that a damper will hide but usually it is best to try and work out what the underlying problems are rather then hiding the as a damper makes your steering effort harder all the time. The bike side mounts should be good and stout on your rig as the /2 frame was designed for sidecar use. What sidecar do you have on it and how is it attached to the bike? Are your steering head bearings tight? If they are the stock BMW ball type bearings not a lot you can do but you can slightly over tighten them. A flat profile tire on the front some times will help with a shake, if nothing else it lowers stopping distance. I like the tire from Heidenau but Metzler also makes a flat profile tire in 18 inch and Avon one in 19 inch. Make sure all of your mounting hardware is tight and not flexing, that your wheel bearings on not loose, your sidecar tire is in good order and then you can try changing the toe slightly, Often 1/8 of an inch either way will make a huge difference. While we do not have a damper kit specific to the /5 front end we do offer a "universal" kit that bolts onto fender mounts and then you weld a tab to the upper front strut $250, I would go this route as a last resort.
Jay G
DMC sidecars
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [25 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread


Copyright 2004-2008, The United Sidecar Association — Built by BarringtonPress — Send your suggestions and comments to the webmaster
USCA Web usage policy

(Delete all cookies set by this site)
Running MegaBBS ASP Forum Software
© 2002-2018 PD9 Software