Return to Home page

Search | Statistics | User Listing Forums | Calendars | Albums | Quotes Forum ->  General discussion -> Technical Discussion -> View Thread

You are logged in as a guest. ( logon | register )

Random quote: “Many a true word hath been spoken in jest.” - Shakespeare
- (Added by: OldSchool_IsCool)

Velorex 562 body removal
Jump to page : 1
Now viewing page 1 [25 messages per page]
View previous thread :: View next thread
   General discussion -> Technical DiscussionMessage format
Posted 9/23/2016 11:22 AM (#90832)
Subject: Velorex 562 body removal

New User

Posts: 3
Listers: I have just purchased from Bob Wark, the suspension/brake upgrade kit for the Velorex 562. I own a 1994 MZ Gespann. After talking with Bob, I felt this might be a good upgrade for my rig. I have a few questions. Has anyone done this upgrade. Any tips to help or problems that arose, when installing. How best to go about, and how difficult is it to remove the body from the rig? Is this a two person task? Also can a person with moderate mechanical skills do the install by themselves. Once installed any tips on adjustments lubrication and what not. I apologize for some lame questions, but forewarned is forearmed.

Cheers Clark Bertram
Top of the page Bottom of the page
Posted 9/23/2016 6:58 PM (#90837 - in reply to #90832)
Subject: Re: Velorex 562 body removal


Posts: 4833
Location: Boise, Idaho
Not familiar with the Wark upgrade. Most upgrades don't require a masters degree in mechanics.
Body removal depends upon the year of the 562. The early 15mm axle models have the fender bolted to the body with 2 bolts and tubular braces front and back. Later Cruiser models (20 mm axle) have the fender attached to the sidecar frame and it will remain on the chassis after the body is removed.
Either model bodies have 4 bolts attaching the body to the frame and two more bolts supporting the front of the brush guard.
On my upgrade removal of the body isn't needed. This may also be the case with the Wark kit.

Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [25 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread


Copyright 2004-2008, The United Sidecar Association — Built by BarringtonPress — Send your suggestions and comments to the webmaster
USCA Web usage policy

(Delete all cookies set by this site)
Running MegaBBS ASP Forum Software
© 2002-2018 PD9 Software