Return to Home page

Search | Statistics | User Listing Forums | Calendars | Albums | Quotes
Sidecar.com Forum ->  General discussion -> Technical Discussion -> View Thread

You are logged in as a guest. ( logon | register )

Random quote: "I'am so happy there should be a law against it"
- (Added by: no1outlaw)

Helix and Velorex 562 - guidance and Bingham
Jump to page : 1
Now viewing page 1 [25 messages per page]
View previous thread :: View next thread
   General discussion -> Technical DiscussionMessage format
 
BruceinHouston
Posted 10/22/2005 12:42 PM (#10993)
Subject: Helix and Velorex 562 - guidance and Bingham



I just had a delightful conversation with Douglas Bingham --- if I were anywhere near him, I'd be in his shop in a flash. What a fine fellow.

Does anyone out there know anyone who has a fully engineered mount for a Helix-Velorex 562 combo available? I am fairly handy, and can cut and weld, but I would prefer not to re-invent the wheel--- or end up inventing an unsafe or over engineered one.

There are lots of examples of this combo around, but descriptions of the mounting are lacking. Heck, I am willing to pay for your engineering or mounting hardware--- or for your time to make measurements and images.

These forum's have been a great general resource!
Top of the page Bottom of the page
Loo4two
Posted 10/22/2005 9:48 PM (#11002 - in reply to #10993)
Subject: RE: Helix and Velorex 562 - guidance and Bingham


Try Lonnie Cook at NW Sidecar in Marysville Washington. Another one of those excellent fellows.
David
Top of the page Bottom of the page
Joyce
Posted 10/22/2005 10:10 PM (#11003 - in reply to #10993)
Subject: RE: Helix and Velorex 562 - guidance and Bingham


Bob Darden at Texas Sidecar and Trike is also a great guy. He has done scooter mounting too. Check out his web site.

http://www.texassidecars.com/

Top of the page Bottom of the page

Posted 10/23/2005 11:50 PM (#11040 - in reply to #10993)
Subject: RE: Helix and Velorex 562 - guidance and Bingham


I have a rig, design for Helix's, arriving tomorrow or Tuesday from Texas Sidecar. Once painted it's only suppose to take an hour to hook up. No alignment necessary, it's built into the rig.
Nice people to deal with.

Top of the page Bottom of the page

Posted 10/26/2005 11:37 PM (#11149 - in reply to #10993)
Subject: RE: Helix and Velorex 562 - guidance and Bingham


Got my rig from Texas sidecar today. Everything was bolted down in a very sturdy crate and no damage. Quality is very good. Won't be able to work on it till we get back from our trip next Tuesday but I can "play" in it.

Tony
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [25 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

 


Copyright 2004-2008, The United Sidecar Association — Built by BarringtonPress — Send your suggestions and comments to the webmaster
USCA Web usage policy



(Delete all cookies set by this site)
Running MegaBBS ASP Forum Software
© 2002-2017 PD9 Software